Product development and technology professional services with application to industrial, commercial, planning, management and information processing.
Customization of / with
Multidisciplinary technology
Our Projects
Here are some of the projects we have done, including both the products on demand (upon request or specification) as well as some projects developed on its own initiative.
If you are considering taking our service to develop new projects, take note of the diversity of applications of the projects (for very different markets) and the variety of technological disciplines that we used. Confident that we can satisfy you.
-
Inspection for bottling / packaging
Title: INCA
Year of Introduction: 1989
Automation: Quality Inspection
More...Programmable electromechanical equipment that verify the correct amount and disposition of containers within the packing bins and control mechanisms of removal of defective units. The program allows you to set different inspection configurations in terms of number of packages available, reject rules, etc.
Work done: Design, development and production of mechanical parts, design, development and production of electronic parts, firmware development, installation and commissioning of the equipment at the plant.
-
Proximity Sensors
itle: MTL2-SPJT
Year of Introduction: 1989
Automation: Speed Devices Transduction
More...Small devices which produce an electrical signal of frequency proportional to the rotational speed of the sensed part. Specially developed for vehicular applications in road machinery, farm equipment, etc.., Its completely sealed metal chassis makes them suitable for use aggressive conditions (dust, water, high temperature variations).
Work done: Design, development and production of electronic parts, electronic device encapsulated to withstand severe use conditions and allow the assembly to specification.
-
CAD Software for creating designs programmable sewing machines
Name: MP-CAD
Year of Introduction: 2005
CAD: Software for creating designs for programmable sewing machines
More...CAD System for creating designs such as allegories for pockets, eyelets, small logos, etc. for programmable industrial sewing machines. Unlike traditional systems, based on numerical data entry stitch by stitch, MP-Cad work proposes a form of object-based graphics to which you assign properties that define how the stitches are automatically calculated.
Work done: MP-CAD was developed in the mode "on demand" based on general specifications. Tasks were performed detailed specification, architecture design, development of supported output formats, programming, testing, creation of user documentation and media design (graphic, packaging).
-
Large Format Plotters Vectors
Title: PLOTTER SHP-1800S
Year of Introduction: 2000
CAM: Vector plotters Moldería continuous paper.
More...Teams vector type plot (pen) large format continuous paper, developed for the printing activity of molds for cutting clothes. Molds allow plotting on paper rolls up to 1800 mm wide and 30 meters long, working in sections (windows) of 500 mm. Servo technology based high-speed (up to 1250 mm / sec), these equipments have within its novel features such as automatic detection type paper width, trace points using the standard pen type (non-pressurized) interface Users with LCD display in 3 languages, etc..
Work done: Product Line. Implementation of the concept-building activities, business development, specifications, development of mechanical and electronic parts, firmware development (interface, HPGL interpreter, drivers), prototyping, testing, production, generation of technical documentation and user marketing and Support.
-
Memory Modules for textile machinery
Title: Flash-PLK
Year of Introduction: 2001
Automation: Manageable Flash Storage Devices
More...Flash memory modules for textile machinery, advantageously replacing cartridges based storage semi-permanent. Using a computer that has a serial port and an application developed using the user can manage storage within the device information in quantity equivalent designs cartridges 16 semi-permanent memory.
Work done: design concept, general and detailed specification, development of hardware, firmware and software, creating user documentation, image design, production and marketing.
-
-
Drivers quilting machines
Title: Magenta
Year of Introduction: 1993
CAD / CAM Systems for Machine Quilting / Quilting
More...Line systems for industrial equipment quilting (quilting), composed of CAD software to create designs and CNC controller (including mechanical and electronic components) suitable for new equipment and for retrofitting existing equipment.
Job done: Creating concept, general and detailed specification, CAD software development, hardware and software development of CNC controller, mechanical component design, documentation, production, installation and technical support.
-
Metrology tools for profile cutting equipment
Title: SHM-A
Year of Introduction: 2007
Automation: Digital Length Measuring sub-millimeter resolution
More...Digital Instrument for measuring length semiautomatic equipment aluminum profile cutting up to 10 meters with a resolution of 0.5 mm. The instrument allows for precisely positioning the stops cutting or measuring serial work cut length cut for non-repetitive jobs. It has a bright display of large format, to facilitate viewing in bright conditions, sensor and instrument accommodation dustproof and particles and a simple self-calibration scheme.
Work done: concept, general and detailed specification, hardware development, firmware, mechanical component design, documentation, production, marketing and technical support.
-
CAD Software for garment decoration
Title: BOARD-CAD, Embroidery Office
Year of Introduction: 1993
CAD: Systems Design, Embroidery Editing and Management
More...Extensive line of world class systems for creating, editing and managing designs for garment decoration (embroidery, printing, sequins, rhinestones) with many advanced features. The line includes systems for home use, semi-professional and professional with more than 12,000 installations in 85 countries and in 9 languages.
Work done: line product. Definition of general and detailed specifications, architecture, algorithm development, programming, testing, creation of user documentation, creation of brand image, graphic, website, medium, production, marketing, sales, training and support. Publication of 12 older versions between 1993 and 2011
-
-
User Terminals with LCD Touchscreen
Title: Net II
Year of Introduction: 2005
Automation: multipurpose terminals with LCD touchscreen
More...Multipurpose user terminals with LCD display and touch-screen interface with IP connectivity, standard serial port, input barcode reader and generic parallel interface. These terminals can be used as points of production control, data capture, reporting processes, and so on. The interface and activity can be quickly and easily customized according to customer requirements. IP connectivity (ethernet physical environment) to exchange information between a central computer terminal.
Work done: Product Line. Creating concept, general and detailed specification, development and integration of hardware, firmware and software, mechanical design and production. Creating user documentation. Image design, packaging. Marketing, marketing and technical support.
-
-
Equipment Laser Cutting and Engraving
Title: SHC-100
Year of Introduction: 2004
CAM: pantographic Equipment Cutting and Laser Engraving
More...Vector XY cutting equipment and CO2 laser engraving of up to 100 W of power for signage applications, textiles, plastics, acrylics, wood, etc. Allow both cutting operations as indelibly Customization items, cut models, letters and generally flat pieces, etc. It requires no special software it supports standard formats that can generate the most popular graphics applications, the line offers numerous accessories like tray with removable cutting height control motorized autofocus device for cylindrical parts processing, handling device media rolls , etc. It has an intuitive user interface with color LCD touch sensitive power control "on the fly", IP connectivity, and internal mass storage designs.
Work done: Product Line. General and detailed specification, development and integration of hardware, firmware and software, mechanical design, production. Creating user documentation. Image design, marketing, marketing, training and technical support.
-
Beeper for Railway Level Crossing
Designation: PAN SP-90
Year opened: 2010
Signage: Beep automatically variable intensity
More...Beep rail grade suitable for installation in all configurations of crossing. Its volume is adjusted automatically according to ambient noise conditions. Specially designed for the urban portions of the trace ferroviara, where the intensity standard produces high levels of noise, particularly at night or in low ambient noise situations. These teams advantageously replaced mechanical acoustic signals, emulating their sound and providing a complete outline of indications (exchange rate at two formations, cycle monitoring barrier arm, fault detection signal, etc.). The team has use permit issued by the CNRT.
Work done: Product Line. General and detailed specification, development and integration of hardware and firmware, mechanical design, testing, compliance testing and aptitude production. Creating user documentation. Marketing and Support.
-
Tables Railway Signaling Control
Designation: Table Signs
Year opened: 2010
Signage: Systems Control and Supervision Signaling Ferrorviario
More...Supervision and Control Systems for Railway Signaling booths based HMI technology. These systems deployed active míimicas presentations Station box and allow for the route maneuvers and formations by operating railway equipment shunting and associated control signaling. To do this, have a user interface based on large-format displays and touch-screen interface, based on high availability computers and industrial grade PLC devices that connect computer components with logic via security.
Work done: Product not stocked on specifications. Development and integration of hardware, firmware and software; Construction. Creating user documentation. Training and Support.
-
-
System Protection and Control Software Using
Name: S-MATRIX
Year of Introduction: 2009
Systems: Protection and Control Software Using Cloud Technology
More...S-Matrix is a set of software tools that allow the control of software licenses, managing and monitoring performance characteristics of these via internet. Based on a proprietary technology from Sierra Technology Group, called DRC (dynamic remote configuration), these tools include several segments (client application, server, and Internet Control Panel) and are implemented in different technologies. Have been successfully tested in products with more than 10,000 installations worldwide and over 1200 simultaneous clients working in the protected applications. Through a comprehensive control panel, you can determine the status of any license, extend or revoke its validity, allowing users to experience new features for a limited time, etc.. usage statistics and developing both the application and the features of interest. The tools provide for the use of redundant servers to ensure availability and the whole system is scalable without impact or special effort.
Work done: Creating concept, general and detailed specification, architecture, programming, testing local and global. General documentation. Implementing product line of the company.
-
-
Automation of industrial embroidery machines
Title: BOARD-CDM
Year of Introduction: 1988
CAM: Retrofitting Kit for multihead embroidery machines
More...Kit electromechanical electronic control system for retrofitting of embroidery machines employing a precision mechanism that drives a pantógarfo according to information contained in tapes. The kit is suitable for various makes and models of machines and adds many features to the teams it will increase your speed drastically reduce manteniemto and substantially improve the accuracy.
Work done: Product Line: Concept, design, development and production of an XY mechanism driven by step motors, suitable for embroidery machines of different makes and models. Design, development and production of electronic actuators (drivers) to control the pantograph and other essential actuators of the machine. Design, development and production control system to operate the system, including a graphical user interface. Design and programming the control system for handling electronic actuators from production matrices in standard formats. Image design, marketing, marketing, training and technical support.
-
Galvanometer Laser engraving machines
Title: SHG-50
Year of Introduction: 2006
CAM: Laser Engraving Equipment High Production
More...Machine for performing laser prints on various types of materials and sizes. Application in the area of signage and posters, customized promotional items, product identification, RMG engraving, etc..
The computer control system with the user interface has been designed and developed entirely by Sierra Technology Group. A simple operation menu and advanced on a touch screen allows the user to upload files and prepare them for engraving in seconds. The preparation time has been minimized to increase team productivity.
No additional software is required, as this team can import library designs in standard formats, or designs created by other graphic applications available in the market.
They offer several configurations of machines, varying the type of laser device, laser power, and optical type used, to suit the user's application of this equipment.
Work done: Product Line. General and detailed specification, development and integration of hardware, firmware and software, mechanical design, production. Creating user documentation. Image design, marketing, marketing, training and technical support.
-
-
Systems Planning and Production Control
Designation: EO ORGANIZER
Year opened: 2004
Systems: ERP and Production Control Organization for Industrial Embroidery
More...Software kind multi-user custom ERP application workshops embroidery services. They have shaped the activities of all sectors of a workshop type, for each job count on a particular configuration designed specifically for it.
The information flow begins before the customer places an order or service order, the system provides the estimated time of completion and budgeting from the designs and the number of units to be produced and their characteristics.
Allows registration service orders completely, including specific technical characteristics that are not supported by other types of ERP software. Orders are progressing through different states, to different sectors: sales, administration, production and management according to a configurable workflow.
Each company sets up in the system of jobs as well as the machines it has in its production lines (brands, models and / or features). Designs can be sent directly from the system to the production machines in their reading formats.
The system has a graphical interface for the planning and control of production rate timeline (time-line), which speeds the job scheduling and presents a real-time visual report of the production is performed.
Finally, it also allows the generation of management reports from each of the departments or sectors of the company, and the safe storage of all information.
Work done: line product. Definition of general and detailed specifications, architecture, algorithm development, programming, testing, creation of user documentation, creation of brand image, graphic, website, medium, production, marketing, sales, training and support.
-
